These tweaks can give gaming laptops some serious performance gains. Good luck!
Arctic Silver 5 –
AS5 + Cleaning Kit –
Thermal Pads –
Intel XTU –
Throttlestop –
Prime95 –
Music Credits:
Intro: Matanoll – Clearness (Robotaki Remix)
Background: Fili – Closure
If you want to support the channel, consider a Dave2D membership by clicking the “Join” button above!
Purchases made from store links may give me some money.
(It doesn’t cost you extra, so please buy everything)
Nguồn: https://zaia.vn
Xem thêm bài viết khác: https://zaia.vn/internet/
Xem thêm Bài Viết:
- Chuyên gia bật mí cách kiểm tra laptop cũ không phải ai cũng biết
- Tuyệt chiêu lập nick facebook bằng email 10 phút đơn giản, nhanh chóng
- Hướng dẫn tháo , vệ sinh , nâng cấp ram , hdd, ssd cho Inspiron 5567
- #โน๊ตบุ๊คมือสอง . Dell inspiron 5459
- Đánh giá DELL INSPIRON 13-5378 CORE I5 7200U – RAM 4GB – SSD 128 – CẢM ỨNG
If you plan on doing these mods, be sure to do your research. It's a bit of work but the gains are awesome. Good luck!
I have an asus gl503 i7700hq i repasted, de dusted cranked it down to -.175mv, in warzone it still goes up to 95*, I used mx-4. What should I do to reduce the temp? please fellas help me
My laptop starting leaving smoke, should i be scared?
who is watching in 2020 ?
Instructions not clear
Now my laptop is analysing my issues…
What about turbo max power?
I tried to under volt my lappy with i5 8300h to – 50mv amm getting performance lag
O$ hack put Arch Linux on it
Should it be done on the battery or with the charger plugged in? Also is the paste in the video still the best today? I want to undervolt my Dell xps 7590 i7. In the initial Stress Test (on battery) the temp was 100-99°C is that normal?
This is how a pro explains.
Is gratifying to have a good teacher in youtube.
Hey Dave, awesome video man! But could you maybe make an updated video, discussing the "pump out" effect of thermal pastes. Leaving the stock thermal paste in your laptop might sometimes even be the better option in the long run, since a lot of high quality pastes with good thermals, might not last so long in a laptop on a bare die. This is a topic nobody is discussing really. 🙂
After tweaks 13:37 minutes for the benchmark. I see what you did there.
Comments in the nutshell
"I undervolted your mom, now she can eat farts faster"
I undervolted my gf's MSI laptop AND applied liquid metal to CPU and GPU and the temps were insanely low…. for about 3 days, then the temps in overwatch and general CPU benchmarks became horrendous again. And now a few weeks later, they're back down! This has got to be some sort of software thing
I use mustard paste as thermal paste
I know its too late and the age of this video means this will probably not be read but if it helps one person thats already good, but if you're replacing the thermal paste of a laptop, it is very important that you spread the thermal paste on the CPU/GPU die to cover it all. It's better to have a little extra than not enough since you should be using a non conductive paste anyways. the reason is that the die is much more sensitive to thermal temperatures if it isnt covered well, as opposed to CPU's in desktops that have lids .
The best thermal paste is milk teeth because you can taste its yummyness as you apply
What about an i7-8750H? What undervolt should I do?
I am not even into tech stuff I just like to watch him speak
Mine idle temp went to 93°